Please use pdf to print the instruction manual.
Contents
1 - 2 Conventions used in this manual
1 - 3 Trademarks and copyrights
1 - 5 Accessories sold separately
USB cables (for communication or data transmission)
2 - Names and functions of parts
3 - 1 Inserting and removing microSD cards
3 - 2 Preparing the power supply
Using an AC adapter (sold separately)
3 - 3 Turning the power on and off
Turning the unit off (putting it in standby)
Setting the language, date and time
Formatting (initializing) microSD cards
4 - 2 Setting the built-in mics
4 - 3 Connecting external mics and other equipment
Setting the output for camera use
4 - 5 Connecting monitoring equipment
4 - 6 Using the built-in speaker
4 - 7 Adjusting the playback volume
4 - 8 Connecting computers and smartphones
5 - 1 Using the INPUT SELECT function
5 - 2 Making input settings for each input
Using the STEREO LINK function
Setting recording input sources (INPUT)
Using phantom power (phantom voltage)
Adjusting the input level automatically (AUTO GAIN)
Setting the low-cut filter (LOW CUT)
Setting the noise gate (NOISE GATE)
Setting the limiter (LIMITER/COMP)
Inverting the input phase (PHASE INVERT)
Changing the input gain (GAIN)
5 - 3 Adding reverb to inputs (REVERB)
5 - 4 Setting the phantom power voltage
6 - 2 Button operations during recording
6 - 3 Recording with the ASMR app
6 - 4 Recording with the MANUAL app
Recording guide function (MANUAL app only)
6 - 5 Recording with the MUSIC app
Selecting the type of instrument to record
Adding reverb to the input (REVERB)
6 - 6 Recording with the VOICE app
6 - 7 Recording with the FIELD app
Selecting the recording subject
6 - 8 Recording with the PODCAST app
Playing effect sounds during recording
7 - 1 Monitoring individual inputs (solo monitoring)
7 - 2 Changing the recording file format
7 - 4 Pausing during recording (REC PAUSE)
7 - 5 Starting recording automatically (AUTO REC)
7 - 6 Recording with two settings at the same time (DUAL REC)
7 - 7 Capturing a few seconds before starting recording (PRE REC)
7 - 8 Adjusting input levels automatically (AUTO GAIN)
7 - 10 Designating the folder use for recordings
7 - 11 Changing files while continuing to record (file incrementation function)
7 - 12 Overdubbing and punching in/out (MANUAL app only)
Undoing overdubbing and punching in/out (UNDO)
Canceling UNDO operations (REDO)
7 - 13 Recording times (in hours: minutes)
8 - 1 Opening the playback screen
Changing the playback position
Searching backward and forward
Adjusting the mix balance of the tracks
9 - 2 File and project structure overview
9 - 3 Folder hierarchy example
Changing the names of folders (RENAME)
Deleting all files in a folder (ALL FILES DELETE)
Deleting folders (FOLDER DELETE)
9 - 7 File and project operations
Viewing file details (FILE INFORMATION)
Deleting files and projects (FILE DELETE)
Deleting tracks in projects (TRACK DELETE)
Enabling and disabling protection (CHANGE PROTECT)
Normalizing recordings (NORMALIZE)
9 - 8 Setting where recording files are saved
Adding marks automatically (AUTO MARK)
Adding marks when peak levels occur (PEAK MARK)
10 - 4 Jumping to set marks (mark skipping)
10 - 5 Dividing files at every mark
11 - 1 Setting the output for camera use
11 - 2 Using the automatic slate tone function (AUTO TONE)
Setting the AUTO TONE function
12 - 1 Connecting with computers
12 - 2 Connecting with iOS devices
12 - 3 Accessing microSD cards from a computer
Exchanging files with computers
12 - 5 Using as an audio interface
Portacapture X6 USB audio channel assignments
12 - 6 Using the unit as a USB mic
Inputting sound to the computer using the unit inputs
Using the computer output as sound input to this unit
13 - 2 Using the mid-side decoding function
14 - 1 Installing the dedicated controller app
14 - 2 Connecting with this unit using Bluetooth
14 - 3 Using the dedicated smartphone app
15 - 1 Adjusting gain differences between built-in mics (mic trim function)
15 - 3 Showing various information
15 - 4 Resetting the date and time
15 - 6 Resetting the unit to its factory defaults
15 - 7 Formatting microSD cards
15 - 8 Using the automatic power saving function
15 - 9 Selecting the power source
15 - 10 Setting the AA battery type (BATTERY)
15 - 11 Power saving (energy conservation) mode
15 - 12 Adjusting the display contrast (CONTRAST)
16 - Changes made in firmware version updates
16 - 1 The following function have been added or changed since firmware version 1.10
16 - 2 The following functions have been added or changed since firmware version 2.00
19 - 1 Specifications and rated values
Recording times (in hours: minutes)
Operating system and other requirements